Hammer Mills
Power ranges between 5 and 70 t/h are possible (depending on structure and moistness of the grist)
General
- Driving power up to 450 kW is possible.
- The temperatures of the rotor shaft bearing and the mill chamber are monitored.
- Easy shift of rotational direction by means of pneumatically adjustable baffle plates
- Short idle and set-up times due to user-friendl changing systems for beaters and screens
- Regular distribution and feeding of grist due to Triplex screw feeder
- Grist cleaning due to upstream plate magnets and heavy particle separator
Fields of application
Milling of:
- Crops and similar products
- Wood chips for production of wood pellets
- Straw as bedding/litter or for production of straw pellets
- Biomass
Hammer mills manufactured by Anlagenbau Gelting GmbH stand out thanks to their solid design and their user-friendly operation.
Through the use of a frequency converter, it is possible to adjust the rated rotating speed of the mill continuously. This has a significant influence on the structure of the ground material.
Type |
Rotor dia Ø |
Mill chamber width in mm |
Screen surface in m² |
Air capacity m³/min |
1300/1200 | 1300 | 1200 | 3,6 | 220 |
1300/1200 | 1300 | 1000 | 3,0 | 180 |
660/1000 | 660 | 1000 | 1,32 | 100 |
660/800 | 660 | 800 | 1,06 | 80 |
Information to Download